Workshop Division

TEMMCO Workshop handles medium to heavy engineering including turning, milling, vertical and horizontal boring, CNC turning and milling, fabrication, sub arc and weld reclamation.

---

Shaft Machining

Weld Reclamation

---

Capabilities 

Turning
 Lathe 230mm Swing x 1.5m between centres
 Lathe 420mm Swing x 1.7m between centres
 Lathe 550mm Swing x 4m between centres
 Lathe 800mm Swing x 5m between centres
 Lathe 1200mm Swing x 5m between centres

Milling
 Vertical Mill Axis X1200, Y300, Z400
 Elga Mills x 2 Axis X4200, Y900, Z1200

Vertical & Horizontal Boring

 Vertical borer to 3100mm diameter
 Vertical borer to 1500mm diameter
 Horizontal Borers x 2

CNC Machining Centres
 CNC Machining Centre Axis X1250, Y700, Z650
 CNC Machining Centre Axis X1000, Y525, Z500
 CNC Machining Centre x 2 Axis X2000, Y890, Z850
 CNC Bed Mill X4000, Y1000, Z1500
 CNC Turning 3.1 m between centres x 720 over bed

Drilling Machines
  Radial Arm Drills x 2
  Pedestal Drills x 2

Fabrication & Weld Reclamation
 General Fabrication
 Special Purpose Automatic Welding
 Sub Arc Welding
 MIG/TIG

 5 Ton Rotator (Horizontal/Vertical)
 10 Ton Horizontal Welding Rotator
 Automatic Welding Lathe 800mm Swing x 5 metres

Works Facility
 A factory of 3,000 m². Consisting of four (4) bays with each bay serviced by
two (2) overhead travelling cranes.
 Yard and lay down areas (7,500 m²).